产品详情

LDD-V-JIG

LAPCON隐形门阻尼器LDD-V用调节夹具LDD-V-JIG

2 / 2搜索结果

筛选项目
  • LAPCON隐形门阻尼器LDD-V用调节夹具
  • LDD-V-JIG
●用于调节LDD-V型的承座的位置。

图纸/插图

  • 所有显示

    [How to Use]
    —1. Install the adjustment jig
    ①Fit the adjustment jig firmly into the body.
    *Right-handed and left-handed available.
    *Be sure to adjust the counter plate position after adjusting the installation position of the hinges.

  • 所有显示

    —2. Horizontally adjust the counter plate
    ①Loosen the horizontal adjustment screws.
    ②While holding the adjustment jig by hand, slowly close the door and align the counter plate shaft with the groove.
    ③Tighten the horizontal adjustment screws.

  • 所有显示

    —3. Vertically adjust the counter plate
    ①Loosen the fixing nut.
    ②While holding the adjustment jig by hand, slowly close the door and align the top of counter plate shaft with the bottom of jig.
    ③Tighten the fixing nut or the counter plate shaft firmly.

  • 所有显示

    —4. Check
    ①When removing the jig and closing the door slowly to the end, “click” sounds once.
    *If the door does not close to the end or “click” sounds twice, perform depth adjustment.
    ②When opening the door, “click” sounds once, and the arm is pulled out.
    *If the arm can not be pulled out, perform depth adjustment.
    ③Check if the clearance between the arm and the counter plate shaft is appropriate.

  • 所有显示

    *Depth adjustment of the counter plate (adjustment jig LDD-V-JIG can not be used for depth adjustment).
    ①Loosen the depth adjustment screws.
    ②Align the centre of the counter plate shaft with that of the door thickness.
    ③Tighten the depth adjustment screws.

  • [How to Use]
    —1. Install the adjustment jig
    ①Fit the adjustment jig firmly into the body.
    *Right-handed and left-handed available.
    *Be sure to adjust the counter plate position after adjusting the installation position of the hinges.
  • —2. Horizontally adjust the counter plate
    ①Loosen the horizontal adjustment screws.
    ②While holding the adjustment jig by hand, slowly close the door and align the counter plate shaft with the groove.
    ③Tighten the horizontal adjustment screws.
  • —3. Vertically adjust the counter plate
    ①Loosen the fixing nut.
    ②While holding the adjustment jig by hand, slowly close the door and align the top of counter plate shaft with the bottom of jig.
    ③Tighten the fixing nut or the counter plate shaft firmly.
  • —4. Check
    ①When removing the jig and closing the door slowly to the end, “click” sounds once.
    *If the door does not close to the end or “click” sounds twice, perform depth adjustment.
    ②When opening the door, “click” sounds once, and the arm is pulled out.
    *If the arm can not be pulled out, perform depth adjustment.
    ③Check if the clearance between the arm and the counter plate shaft is appropriate.
  • *Depth adjustment of the counter plate (adjustment jig LDD-V-JIG can not be used for depth adjustment).
    ①Loosen the depth adjustment screws.
    ②Align the centre of the counter plate shaft with that of the door thickness.
    ③Tighten the depth adjustment screws.

规格表

本体

图片 型号 订货编码 报价
LDD-V-R-JIG 270-025-276
LDD-V-L-JIG 270-025-275
图片 型号 订货编码 报价 RoHS Spec Material Colour Type EAN

LDD-V-R-JIG

270-025-276

Right-handed

ABS

Orange

Other

4510932134682

LDD-V-L-JIG

270-025-275

Left-handed

ABS

Orange

Other

4510932134675

向右滑动以查看更多信息

CAD下载

本体

型号
LDD-V-R-JIG
LDD-V-L-JIG
型号 2D 3D RoHS 订货编码
LDD-V-R-JIG DXF DWG SAT IGES X_T STEP

270-025-276

LDD-V-L-JIG DXF DWG SAT IGES X_T STEP

270-025-275

向右滑动以查看更多信息

产品目录 (更新 2019/11/01)

产品目录 (更新 2019/11/01)

相关产品

类别

最近查看的项目

无最近查看的产品。

要跟踪所查看的项目,点击下面的 "保留历史记录" 按钮。

无最近查看的产品。

-所有产品,除非指定,都是精确到公制尺寸。

-尺寸、表面处理、包装等发生变化或停产时,不会另行通知。

-我们的责任仅限于更换商品。

×
筛选
筛选项目
Search Remove ×
RoHS
Loading
Cookie和隐私

可帮助我们改善您的网站体验。使用本网站之时,即表示您同意我司使用Cookie。

了解更多