- 가구 건축용 하드웨어
- 도어 하드웨어
- 도어 댐퍼
- LDD-V-JIG
LDD-V 카운터 플레이트용 조절 지그LDD-V-JIG
2 / 2토탈 결과
invsible damper,hidden damper,invisible door hinge,invisible door,hidden damper
- 카운터 플레이트 설치의 위치 조절이 용이한 카운터 플레이트입니다.
도면/ 일러스트
-
모두 보기
[How to Use]
—1. Install the adjustment jig
①Fit the adjustment jig firmly into the body.
*Right-handed and left-handed available.
*Be sure to adjust the counter plate position after adjusting the installation position of the hinges. -
모두 보기
—2. Horizontally adjust the counter plate
①Loosen the horizontal adjustment screws.
②While holding the adjustment jig by hand, slowly close the door and align the counter plate shaft with the groove.
③Tighten the horizontal adjustment screws. -
모두 보기
—3. Vertically adjust the counter plate
①Loosen the fixing nut.
②While holding the adjustment jig by hand, slowly close the door and align the top of counter plate shaft with the bottom of jig.
③Tighten the fixing nut or the counter plate shaft firmly. -
모두 보기
—4. Check
①When removing the jig and closing the door slowly to the end, “click” sounds once.
*If the door does not close to the end or “click” sounds twice, perform depth adjustment.
②When opening the door, “click” sounds once, and the arm is pulled out.
*If the arm can not be pulled out, perform depth adjustment.
③Check if the clearance between the arm and the counter plate shaft is appropriate. -
모두 보기
*Depth adjustment of the counter plate (adjustment jig LDD-V-JIG can not be used for depth adjustment).
①Loosen the depth adjustment screws.
②Align the centre of the counter plate shaft with that of the door thickness.
③Tighten the depth adjustment screws.
사양
CAD다운로드
카탈로그 (업데이트 2020-07-01)
카탈로그 (업데이트 2020-07-01)
관련 제품
카테고리
- 가구 건축용 하드웨어
- 도어 하드웨어
- 도어 댐퍼
- LDD-V-JIG