LDD-V-JIG

JUSTIERVORRICHTUNG FÜR GEGENSTÜCK DES LDD-VLDD-V-JIG

2 / 2 Gesamtergebnisse

Artikel filtern

invsible damper,hidden damper,invisible door hinge,invisible door,hidden damper

  • JUSTIERVORRICHTUNG FÜR GEGENSTÜCK DES LDD-V
  • LDD-V-JIG

invsible damper,hidden damper,invisible door hinge,invisible door,hidden damper

Einfache Bestimmung der Position des Gegenstücks

Zeichnungen / Illustrationen

  • Alle anzeigen

    [How to Use]
    —1. Install the adjustment jig

    ①Fit the adjustment jig firmly into the body.

    *Right-handed and left-handed available.

    *Be sure to adjust the counter plate position after adjusting the installation position of the hinges.

  • Alle anzeigen

    —2. Horizontally adjust the counter plate

    ①Loosen the horizontal adjustment screws.

    ②While holding the adjustment jig by hand, slowly close the door and align the counter plate shaft with the groove.

    ③Tighten the horizontal adjustment screws.

  • Alle anzeigen

    —3. Vertically adjust the counter plate

    ①Loosen the fixing nut.

    ②While holding the adjustment jig by hand, slowly close the door and align the top of counter plate shaft with the bottom of jig.

    ③Tighten the fixing nut or the counter plate shaft firmly.

  • Alle anzeigen

    —4. Check

    ①When removing the jig and closing the door slowly to the end, “click” sounds once.

    *If the door does not close to the end or “click” sounds twice, perform depth adjustment.

    ②When opening the door, “click” sounds once, and the arm is pulled out.

    *If the arm can not be pulled out, perform depth adjustment.

    ③Check if the clearance between the arm and the counter plate shaft is appropriate.

  • Alle anzeigen

    *Depth adjustment of the counter plate (adjustment jig LDD-V-JIG can not be used for depth adjustment).

    ①Loosen the depth adjustment screws.

    ②Align the centre of the counter plate shaft with that of the door thickness.

    ③Tighten the depth adjustment screws.

  • [How to Use]
    —1. Install the adjustment jig

    ①Fit the adjustment jig firmly into the body.

    *Right-handed and left-handed available.

    *Be sure to adjust the counter plate position after adjusting the installation position of the hinges.
  • —2. Horizontally adjust the counter plate

    ①Loosen the horizontal adjustment screws.

    ②While holding the adjustment jig by hand, slowly close the door and align the counter plate shaft with the groove.

    ③Tighten the horizontal adjustment screws.
  • —3. Vertically adjust the counter plate

    ①Loosen the fixing nut.

    ②While holding the adjustment jig by hand, slowly close the door and align the top of counter plate shaft with the bottom of jig.

    ③Tighten the fixing nut or the counter plate shaft firmly.
  • —4. Check

    ①When removing the jig and closing the door slowly to the end, “click” sounds once.

    *If the door does not close to the end or “click” sounds twice, perform depth adjustment.

    ②When opening the door, “click” sounds once, and the arm is pulled out.

    *If the arm can not be pulled out, perform depth adjustment.

    ③Check if the clearance between the arm and the counter plate shaft is appropriate.
  • *Depth adjustment of the counter plate (adjustment jig LDD-V-JIG can not be used for depth adjustment).

    ①Loosen the depth adjustment screws.

    ②Align the centre of the counter plate shaft with that of the door thickness.

    ③Tighten the depth adjustment screws.

Spezifikationstabelle

Gehäuse

Bild Artikelbezeichnung Artikelnummer Anfrage
LDD-V-L-JIG 270-025-275
LDD-V-R-JIG 270-025-276
Bild Artikelbezeichnung Artikelnummer Anfrage RoHS Spezifikation Material Farbe Ausführung EAN

LDD-V-L-JIG

270-025-275

Linkshändig

ABS

Orange

Sonstiges

4510932134675

LDD-V-R-JIG

270-025-276

Rechtshändig

ABS

Orange

Sonstiges

4510932134682

Verschieben, um mehr zu sehen

CAD-Download

Gehäuse

Artikelbezeichnung
LDD-V-L-JIG
LDD-V-R-JIG
Artikelbezeichnung 2D 3D Sonstiges RoHS Artikelnummer
LDD-V-L-JIG DXF DWG SAT IGES X_T STEP 3DPDF

270-025-275

LDD-V-R-JIG DXF DWG SAT IGES X_T STEP 3DPDF

270-025-276

Verschieben, um mehr zu sehen

Katalog (Aktualisieren 2020.01.01)

Katalog (Aktualisieren 2020.01.01)

Verwandte Produkte

Kategorie

Ihre zuletzt angesehenen Artikel

Sie haben keine kürzlich angesehenen Produkte.

Wenn Sie den Überblick über die angesehenen Artikel behalten möchten, klicken Sie auf das Symbol "Verlauf beibehalten" unten.

Sie haben keine kürzlich angesehenen Produkte.

×
Filter
Artikel filtern
Suche Alle zurücksetzen ×
RoHS 2
CAD
Loading
Cookies und Datenschutz

Cookies helfen uns, Ihre Webseiten-Erfahrung zu verbessern. Durch die Nutzung unserer Website erklären Sie sich mit der Verwendung von Cookies einverstanden.

Mehr erfahren