ONE WAY TORQUE HINGEHG-TQA
2 / 2 total results
- Passed 30,000 open/close private cycle test
- Free Stop
friction hinge, position controle
- Friction in one direction only: Allows for frictionless handling of the door in the opposite direction.
Torque is stable.
- —Operating temperature: 0°C~50°C
- —Impact-free opening and closing of door.Medical equipment, FA equipment, and OA equipment, etc.
- Recommended Screw
- —M5 binding head screws
—Be sure to read the "Cautions".
—Use the door at less than 80% of torque (7.2N⋅m or less).
—Torque will decrease at low temperature.
—Not suited to vibration environment.
—Hexalobular socket head screw (shown below as ⦾) may not be used for torque adjustment.Do not tighten or loosen.
—Install an external stopper to hold the door within the range where torque is not effective (Refer to the lower left diagram for details).
—Install a catch to keep the door closed.
—Before installation, check if the installing position is strong enough.
—Install the torque unit (male) at the fixed side while the clutch unit (female) at the movable side.
—Sold in pairs.
—When installing, ensure that both hinge shafts are levelled and aligned.
Your Recently Viewed Items
HG-TQA - One-way torque hinge