- KA-150
MONITOR BRACKETKA-150
1 / 1 total results
- Total length can be changed by adjusting the pole length.
Pole length can be adjusted as order basis. For further details, please contact local representatives.
Ball-shaped holding part allows adjusting to any angle (loosen the screw and adjust).
Mounting hole pitch (75×75mm) on the monitor mounting side conforming to the VESA standard. - Accessories
- —Hex key (for fixing the mounting base)
- Recommended Screw
- —Tapping screw 4.5 or M4 screw
Spec Table
Body
| Image | Item Name | Item Code | Purchase | Quotation |
|---|---|---|---|---|
|
KA-150 | 210-030-578 |
|
| Image | Item Name | Purchase | Item Code | Quotation | RoHS | Main Material | Finish/Colour | Load Capacity N.m | Load Capacity kgf.cm | Type | Max Load Capacity kg | Installation Method | EAN |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
KA-150 |
210-030-578 |
|
|
Aluminium Alloy |
Silver Enamel |
4.4 |
0.45 |
Monitor Arm |
4.5 |
Wall/Base |
4510932004480 |
Slide to See More
CAD download
Catalogue
Note
—Monitor mount is used for moving and adjusting monitor position. Do not apply load on display when using.
—Durability varies depending on operating environment and frequency. Confirm the adaptability for the purpose of use in advance. For details on durability test, please contact local representative.
Category
Your Recently Viewed Items
You have no recently viewed products.
If you would like to keep track of items viewed, click on the "Keep History" button below.
You have no recently viewed products.
-All items, unless specified, are made to exact metric dimensions.
-Changes in dimensions, finishes, and packing etc. or suspension of production may occur without notice.
-Our liability is limited to the replacement of the merchandise.
Clear All
Loading