Product details

LDD-V-JIG

ADJUSTMENT JIG FOR COUNTER PLATE OF LDD-VLDD-V-JIG

2 / 2 total results

Filter items
  • ADJUSTMENT JIG FOR COUNTER PLATE OF LDD-V
  • LDD-V-JIG
For Lapcon door damper LDD-V only.
Used for adjusting the counter plate position of LDD-V.

Drawings / Illustrations

  • Show all

    [How to Use]
    —1. Install the adjustment jig
    ①Fit the adjustment jig firmly into the body.
    *Right-handed and left-handed available.
    *Be sure to adjust the counter plate position after adjusting the installation position of the hinges.

  • Show all

    —2. Horizontally adjust the counter plate
    ①Loosen the horizontal adjustment screws.
    ②While holding the adjustment jig by hand, slowly close the door and align the counter plate shaft with the groove.
    ③Tighten the horizontal adjustment screws.

  • Show all

    —3. Vertically adjust the counter plate
    ①Loosen the fixing nut.
    ②While holding the adjustment jig by hand, slowly close the door and align the top of counter plate shaft with the bottom of jig.
    ③Tighten the fixing nut or the counter plate shaft firmly.

  • Show all

    —4. Check
    ①When removing the jig and closing the door slowly to the end, “click” sounds once.
    *If the door does not close to the end or “click” sounds twice, perform depth adjustment.
    ②When opening the door, “click” sounds once, and the arm is pulled out.
    *If the arm can not be pulled out, perform depth adjustment.
    ③Check if the clearance between the arm and the counter plate shaft is appropriate.

  • Show all

    *Depth adjustment of the counter plate (adjustment jig LDD-V-JIG can not be used for depth adjustment).
    ①Loosen the depth adjustment screws.
    ②Align the centre of the counter plate shaft with that of the door thickness.
    ③Tighten the depth adjustment screws.

  • [How to Use]
    —1. Install the adjustment jig
    ①Fit the adjustment jig firmly into the body.
    *Right-handed and left-handed available.
    *Be sure to adjust the counter plate position after adjusting the installation position of the hinges.
  • —2. Horizontally adjust the counter plate
    ①Loosen the horizontal adjustment screws.
    ②While holding the adjustment jig by hand, slowly close the door and align the counter plate shaft with the groove.
    ③Tighten the horizontal adjustment screws.
  • —3. Vertically adjust the counter plate
    ①Loosen the fixing nut.
    ②While holding the adjustment jig by hand, slowly close the door and align the top of counter plate shaft with the bottom of jig.
    ③Tighten the fixing nut or the counter plate shaft firmly.
  • —4. Check
    ①When removing the jig and closing the door slowly to the end, “click” sounds once.
    *If the door does not close to the end or “click” sounds twice, perform depth adjustment.
    ②When opening the door, “click” sounds once, and the arm is pulled out.
    *If the arm can not be pulled out, perform depth adjustment.
    ③Check if the clearance between the arm and the counter plate shaft is appropriate.
  • *Depth adjustment of the counter plate (adjustment jig LDD-V-JIG can not be used for depth adjustment).
    ①Loosen the depth adjustment screws.
    ②Align the centre of the counter plate shaft with that of the door thickness.
    ③Tighten the depth adjustment screws.

Spec Table

Body

Image Item Name Item Code Quotation
LDD-V-R-JIG 270-025-276
LDD-V-L-JIG 270-025-275
Image Item Name Item Code Quotation RoHS Spec Material Colour Type EAN

LDD-V-R-JIG

270-025-276

Right-handed

ABS

Orange

Other

4510932134682

LDD-V-L-JIG

270-025-275

Left-handed

ABS

Orange

Other

4510932134675

Slide to See More

CAD download

Body

Item Name
LDD-V-R-JIG
LDD-V-L-JIG
Item Name 2D 3D RoHS Item Code
LDD-V-R-JIG DXF DWG SAT IGES X_T STEP

270-025-276

LDD-V-L-JIG DXF DWG SAT IGES X_T STEP

270-025-275

Slide to See More

Catalogue

Related products

Category

Your Recently Viewed Items

You have no recently viewed products.

If you would like to keep track of items viewed, click on the "Keep History" button below.

You have no recently viewed products.

-All items, unless specified, are made to exact metric dimensions.

-Changes in dimensions, finishes, and packing etc. or suspension of production may occur without notice.

-Our liability is limited to the replacement of the merchandise.

×
Filter
Filter items
Search Show All ×
RoHS
CAD
Loading
Cookies and Privacy

Cookies help us improve your website experience. By using our website, you agree to our use of cookies.

Learn More